PA Hot Melt Adhesive Pellet 2102

Application: PA Hot Melt Adhesive Pellet 2102, excellent polyamide hot melt adhesive, perfectly for making high-grade leather shoes, leather edge folding, leather notebook making, leather suitcase bonding. Apply with all common hot melt adhesive applicators.

Processing temperature [°C]:160 – 180
Appearance:Yellowish Transparent
Softening range [°C]:approx. 100±5
Open time at 160 °C**:Short (GC test method)
Viscosity at 180 °C [mPas]:6,000 ± 500
PA Hot Melt Adhesive Pellet 2102
PA Hot Melt Adhesive Pellet 2102

Characteristics: High heat and good chemical resistance. Long open time. Very good resistance to oxidation, heat. No string. Smoke and odor free. Good liquidity and good thermal tackiness. No impurity and no bubbles.

Directions for Use: Pay attention to the parameters, and characteristics of each hot melt adhesive models. Adjust the viscosity and open time through temperature control. Melt in about 5-10°C higher during summer season. Do not mix use with other adhesive models and types. Tank lid should be closed immediately after pellet filling. Do not over fill the tank with too much hot melt adhesive pellet, to avoid partially over-heating and aging.

General bonding requirements: The process of bonding and joining with hot melt adhesive depends on many factors, such as the properties (surface tension, plasticizer content…), as well as the bonding process conditions (environmental temperature, humidity…). Therefore, clients should take into consideration of their everyday production conditions and test our models to get the most propriate and stable parameters. For best bonding performance, substrates should be dry and free of dust, oil and impurity. Process with a minimum temperature of 20°C and avoid windy environment.

Cleaning: Use spatula to remove glue material while still hot at first and then cleanse residues with proper hot melt adhesive cleaner.

Safety instructions: Wear protective glass and gloves while pouring adhesive pellets into the tanks. Forbidden fires.

Storage: Sealed in cool and dry containers and avoid direct lightings, with temperature below 35°C and avoid heating and fire.

Shelf-life: 12 months under proper conditions.

Remarks: For further information concerning safety, processing, transport and storage, please refer to the Material Safety Data Sheet or our after-sale personnel. The information we provide is based on our test, as well as experience provided by our clients. Therefore, they may not be possible to cover all application parameters. Please contact us for our specialists suggestions and samples will be provided for test in specific applications.

Related Products